Product description
Add to Cart
Customer Reviews
4.1 out of 5 stars 2,119
4.3 out of 5 stars 4,476
4.2 out of 5 stars 2,682
4.3 out of 5 stars 2,323
4.3 out of 5 stars 2,323
4.1 out of 5 stars 54
Price
$37.99$37.99 $6.83$6.83 $26.99$26.99 $16.70$16.70 $49.99$49.99 $16.99$16.99
APP Control
✓
✓
✓
✓
✓
✓
Length
10 Pack 15ft 100 ft 16.4ft 32.8 ft 14 inch
Under Cabinet Lights
LED Strip Lights
Under Cabinet Lighting
Under Counter Lighting
Led Strip Lighting
Under Shelf Lighting
RF Wireless remote control
1.Signal can go through the obstacles( Cabinet, Door, Wall…).
2.After re-match, 1 remote can control many matched lights.
3.Remote can be perfect to adjust the brightness or setting a timing off this cabinet light kit.”
Touch Control
1. Turn on and turn off light. —Just short touch once.
2. Switch color temprature. —When touch to turn on, if within 2 seconds you touch again, the color temprature will switch.
3. Adjust brightness smoothly. —Long touch. The brightness will smoothly changes between max and min value. Always starts with decline first.”
“How to re-match”?
1.After plug in the power, turn on the light bar(to make sure all the connection is right).turn off the light(just click the button on the dimmer, all the connection is still fine),
2.RF Wireless remote control, then press the on/off button on the remote.
3.The touch function is turned on by default and can be turned off by remote control: press the OFF key five times continuously to turn off the touch function.Press the ON key five times in a row to turn on the touch function.
Product Dimensions : 4.5 x 4.1 x 2.2 inches; 5.29 ounces
Item model number : DBA0613013B
Date First Available : September 6, 2022
Manufacturer : DAYBETTER
ASIN : B0BD89ZWH2
Customer Reviews: 4.4 4.4 out of 5 stars 1,238 ratings var dpAcrHasRegisteredArcLinkClickAction; P.when(‘A’, ‘ready’).execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( ‘acrLink-click-metrics’, ‘click’, { “allowLinkDefault”: true }, function (event) { if (window.ue) { ue.count(“acrLinkClickCount”, (ue.count(“acrLinkClickCount”) || 0) + 1); } } ); } }); P.when(‘A’, ‘cf’).execute(function(A) { A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { “allowLinkDefault” : true }, function(event){ if(window.ue) { ue.count(“acrStarsLinkWithPopoverClickCount”, (ue.count(“acrStarsLinkWithPopoverClickCount”) || 0) + 1); } }); });
Warm White and Daylight White : Dimmable Under Cabinet Lights Plug-in LED Strip Lights for kitchen, 6 PCS pre-cut LED lights strip. White cabinet light Suitable for DIY your kitchen, cabinet, closet, counter, shelf, TV back, showcase and anywhere you want
Super Bright & Dimmable : Dimmable led under cabinet lights for kitchen. Super bright strip lighting, 2700 K-6500 K natural light, brightness adjustable. Can do under cabinet lighting, under counter lighting, Light up every corner for you kitchen
Dual Control : RF Remote + Touch Control. The RF remote controller with super penetrating power has various function, dimming, timing off, and five dynamic function, three scene modes. The dimmer has memory function, It will store last setting in memory
Timing and Memory : Automatically turn off the light after 60 S, Control under cabinet led lights through touch function, support power-off memory, the under counter lights power on again after power off, the light strip will continue to the last state
Safe and Easy Install : Safety power adapter with 24 V low voltage. And backed with strong adhesive tape, better heat dissipation, stronger, and not easy to break. This light strips with strong adhesion on the back, which stick well to the cabinet area
Patrick –
Great LED light strip that gets the job done
As like many other comments, “beautiful and easy to install.” Here’s what I can add.Making your own LED light strip is actually easy as long as you know how to solder. Just cut to length your roll of lights only through the middle of a column of contacts, attach LED driver to strip, attach strip to location, and attach driver to power source (plug-able method is the safest). These light strips by DayBetter are even easier as the strip is already divided into six segments roughly 1ft 7-8in long that comes ready to plug into each other for a maximum length of 9.8ft. The only downside is you give up on other conveniences; the controller/driver comes already attached to the 1st segment with roughly about 4in of cable, and the power cord is roughly 2ft 10in only. So you need a convenient outlet close by (or use an extension cord). On the plus side, the plug/power-adapter is small and compact and looks pretty good on the wall outlet.Things not explained:▪︎ The picture of the box contents (as of September 2025) is complete, but not descriptive. The 6 Light strip segments are depicted bottom left. The white srips on top right are connection extensions for between the lighted segments. Five 6in extensions, and three 3in U connectors (the plugs both face on one side). These connectors are foldable (flat) copper wires (but try not to bend and unbend too many times).▪︎ The LED strip segments can be cut to shorter lengths, but ONLY where the column of contact pads are. They look like a stack of copper bars.I recommend getting strip light channels to house these lights. The LED light strips are essentially bare circuit boards, which means there are potential exposed points that can be shorted. I have sweaty hands, and even with the lights off, I can put my finger between two lights or circuit chips, and two or more lights near my finger will weakly light up. There a several other reasons to use light channels, but I’m not going to elaborate on them here.Issues:▪︎ The controller cord and power cord is rather too short.▪︎ No known official way to order more controllers & power adapters to use with unused light strip segments.▪︎ The unpairing and pairing does not really do anything. After unpairing, the lights only dimmed and brightened (not blink as it should), and afterwards I can still control the lights with the remote. In fact, I’ve tried the remote on another set of lights that I have not done the unpair/pair routine (and was still controlled by its own remote) and I was able to control the other lights straight off the bat.Last note:▪︎ The recieving female plugs on the connection extensions are out-of-the-factory new, and may not be easy to connect with its counterpart. Before making the initial plug-in, turn the two plugs 90° to each other so that you can push a single pin into each of the recieving hole one at a time (being careful to not poke yourself) to break in the plug.All and all, I’m very satisfied with this LED strip light. I, in fact, have more than one of them.
Matthew Miller –
These are great.
These work great! They can be either “daylight” which I don’t care for or amber. You can adjust the brightness but even at full they aren’t blinding. The stick back makes for easy instalation. I put them in the top. Our kitchen always felt dark, these solved that problem. And the little piwer box responds to toych which iss great for my vertically challenged girlfriend.
Kimberly Christianos –
Great lighting solution for desk lighting
I wanted some light strips to attach to the bottom of my monitors to provide focused lighting for my work desk. These are perfect!They attached easily, the adhesion is great and each strip is an excellent length for each monitor. The connectors were easy to attach as well. The strips are lightweight.There are multiple types of lights as well as light modes, so you’re sure to find on that works perfectly for you.You can choose the color temperature from 6 presets, as well as adjust the brightness level. These also have a sunrise, sunset and night mode.Another fun option are the dynamic modes – flashing, gradient, jump, and 2 breathing modes. It’s great to have this option, but as I’m sure you can imagine, I won’t be using them at my work desk LOLIf I was looking for white lighting for a display, these would also be perfect.All around solid choice for LED lighting with multiple options.
Kiko –
Super Brightness, but Delicate!!!
These are great in many ways: super easy to put up, 6 different “color” tones, and super bright. This is my second set, the 1st quit working shortly after the 30 days return window was up. I guess I could have followed up with the manufacturer, but for the money I just decided to try another set, after buying 3-4 different ones that were either not bright, lasted less than a month, etc.Be forewarned “handle very carefully”, these strips are very delicate,Overall, they are the best set I tried out of the other 3-4 I tried.
John D. –
Bright Lights !
These things are easy to install and really make a difference. Was using the encased lights that plug in to each other but these “tape lights” are so much better. Don’t know how long they will last but they should be like any other LEDs and last a long time. Someone on here mentioned that the adhesive is weak but not so on the set I got….very strong glue strips and sticks nicely to wood and looks like it will stay put; time will tell. Just make sure the surface is CLEAN and you apply it right the first time.! So pleased with the look that I bought 2 more sets for above and below the cabinets. Really nice addition to my existing lights and the WOW factor is a 10! Be careful to order the right length though…..you CANNOT add extra strips at the end of a strand because the power supply is calibrated to only drive the number of strips supplied in the box. They come in so many different lengths that, if you measure right, you shouldn’t have any problem getting them to fit your space. Would highly recommend.
Lorenzo –
Easy installation and easy adjustment of color and brightness
I bought two of the short sets because I have two groups of upper cabinets in my kitchen. Since the light tape is made of one foot long sections plugged together, it is easy to adjust the length. The adhesive backing on the tape is very sticky making it easy to install. The transformer is small and barely noticeable in the wall outlet. We love the easy adjustability of lighting color and brightness. The best part is one remote control operates both groups at the same time.I recommend temporarily installing the light tape with masking tape so you can get the positioning exactly where you want it.