From the brand
ECOVACS DEEBOT X8 PRO OMNI
3 Nozzles Wide Angle Spray Technology – A fully upgraded 3 nozzles wide angle spray technology, together with the wet cloth ensure efficient and effective cleaning.The water pressure is increased by 100% with an improved function time of 90%, all dirt dissolves and is eliminated in one stroke.
Intelligent Path Planning Technology – The WINBOT W2 PRO has a brand-new upgraded brushless motor which, combined with WIN-SLAM 4.0 intelligent path planning, can increase cleaning efficiency by 30%. Through intelligent path planning, the cleaning pattern is optimised to enable efficient turning and enhanced edge detection, so it can adapt to a wide range of window types and scenarios – whether that’s floor-to-ceiling, small-sized, frameless or tilting windows.
10-Level Protection System – With the 10-level protection system, based on hardware and software, WINBOT W2 PRO offers maximum safety for cleaning windows and their hygiene. The entire protection system includes 6 hardware-based protection measures against drops, 3 steps of intelligent protection and insurance against accidental damage.
Innovative Steady-climbing System – Its intelligent climbing system is powered by an upgraded rubber belt which is highly water and friction resistant, ensuring stable movement without slippage. When wet wiping, WINBOT’s wheels system reduces water contact and increases stability when climbing upwards and downwards.
Edge Detection Technology – Detecting edges with remarkable accuracy, it smartly adjusts the cleaning route in just 0.02 seconds, effortlessly tackling the challenge of frameless windows. WINBOT W2 PRO seamlessly adapts to reflective windows, showcasing its versatility not only in bright lighting but also in darkness. Whether indoor or outdoor, day or night, WINBOT W2 PRO is your smart solution for impeccable window cleaning.
SFSig –
Really works, easy to use, great results
I was somewhat skeptical when I bought this, but I have a huge wall of windows in my home, 10 feet high, and cleaning them has always been a struggle. This machine really works – I was pleasantly surprised. You simply fill up the solution, dampen the microfiber pad, attach it to the bot, activate the bot while it’s pressed against the glass and off it goes, covering and thoroughly cleaning the entire pane. Selecting the cleaning program using the app is simple. Manually controlling the bot using the app isn’t quite so simple but there really shouldn’t be much need for that, as the cleaning programs do the job perfectly. I did not have to manually go back over any spots after the bot was done.The bot comes with a small bottle of branded solution. That’s what I used and it works perfectly. Instructions state you can use other types of solutions – even home-made ones – but I played it safe and found a refill bottle of the branded solution from another online source (it does come from China and takes a bit of time). This solution cleans really well and leaves absolutely no streaks so I wanted to stick with what I know works.I should add that my windows are large, floor to ceiling “window wall” panels (I live in a high rise), for which this bot is well-suited…large rectangular panes with no protrusions from the framing. If you have smaller and/or more separated windows (i.e. lots of framing), I could see this being a bit more cumbersome to use – lots of stops/starts. Likewise, if you have protrusions from the glass edges/framing that the bot would need to navigate around (i.e. window cranks, locks, etc.) that would leave some spots still dirty requiring you to take care of those manually after the bot is done.But, if you have large panes of glass, especially tall ones that would require you to get on a ladder to clean, this bot is the perfect solution.
Misfit –
I like it
A small learning curve to make things easier for you.The microfiber that scrubs the window needs to be damp. If it gets dry, the machine will shut off. When it happened to me, it was on the 2nd floor windows, outside. It went to the top of the window, the red light came on and it stopped. I needed to get the ladder out to reach and retrieve it. If you have very tall windows, and you don’t have a ladder to rescue it if it stops, you have a problem.The unit needs to be plugged in to operate. It has batteries, but they only keep the suction fan running. If the power cord gets unplugged, the red light comes on and the unit stops until it’s plugged back in and reset.I wasn’t able to use the app because my phone can only handle 2 bluetooth concurrent connections, and this would have been the third, but it doesn’t have to have the app to operate.It has performed to my expectations,. No streaks, though I heard that if the window is in the sun and hot, it will streak.It uses a solution that you’ll have to buy, though a small bottle is included with the machine.It’s expensive, but it does clean well.
Rudanbet –
Could not detect low profile window frames
The Winbot seemed to work well on a door window with high frames around the glass, but would constantly get stuck on windows where some edges have almost flush frames, approximately 1 mm or less above the level of the glass. The manual mode was not responsive enough to use on these windows either. The instructions with the unit mentioned that the edges of the window must have a frame about 1/2 inch high, but I did not see this in the product description online. I ended up having to return the unit
Mil P –
Game Changer
This is the best thing since sliced bread!Our windows are fixed glass and too high to do by hand even with a large ladder. The second set of windows hadn’t been done in a long time and had a film from cooking. This machine exceeded our expectations. It was very easy to control it via the app when it got stuck too high up to reach. I have already recommended it to a friend.
James R. Einolf –
Take a good look at your windows before buying
Check the molding around your windows – both inside and outside – before purchasing.If the molding around your windows is square to the window glass and at least an eighth of an inch or so high, this device will work properly.However, if the molding tapers to a flush edge on the glass, the mechanical edge sensors will miss the edge, the robot will ride up on the molding and loose suction, and it will stop and signal for help, requiring you to climb up to wherever it stopped, take it off the window and start over again – which can be a real pain if it does it at the top of a tall window.My windows, which are pretty standard for a ten-year-old tract home, have tapered molding on the exterior, which rendered this device useless. It simply couldn’t complete cleaning a single window without stalling. Amazon took it back, of course, but I wasted an entire Saturday morning trying to get it to work.If you have compatible windows, it does a decent job, and it’s a lot of fun watching it work.
R. Farid –
Really works
This robot actually works. It’s incredibly well built and does a fantastic job of cleaning our windows, which are not accessible from the outside. The suction is very strong, so there is no way it will fall off the window. It does not clean right up to the edge of our windows. There is about 1/2″ on the edge it cannot reach, but overall, I couldn’t be happier with this robot.
spetersen –
This thing works, no more ladders or sore shoulders for this 70 year old! And cleanest windows ever!
If you want clear beautiful windows, this is your ticket. It is so easy to use and my windows have never been cleaner. A few tips. Download the ecowinbot app and actually familiarize yourself with it. Make sure the cleaning pads are only slightly damp, not wet. Use the cleaning fluid that comes with the winbot for streak free. Have a clean wiping cloth to wipe the spot when you remove the machine from the window or it will leave a spot. I’m in love…
Mario F. –
Excelente Robot limpiavidrios. Muy eficiente.
David Rizkallah –
Excellent cleaning
Plantation –
The mains cable supplied with this product arrived with a USA plug. Since I cannot find any way to contact the supplier, I cannot use the device and so I am returning it. Given the substantial cost of the unit it is not realistic to source and pay for a new cable or converter.