Rethink home automation with the Enbrighten Z-Wave Plus In-Wall Smart Fan Control. When paired with a compatible hub, the hardwired smart control operates and adjusts the speed of ceiling fans through individual commands and programmed settings. Wirelessly control the fan’s schedule and speed for effortless management of your home. Your automation possibilities are seemingly infinite when connected to hubs from Wink, SmartThings, HomeSeer, Vera, Nexia and more.
Switch upgrade – Easily replace any standard in-wall switch to remotely turn on or off and adjust speed levels – high, medium and low settings – of a ceiling fan.
Multiple fans – Wirelessly control and schedule up to two fans from the same in-wall switch
Dedicated device – The smart control is specifically designed to operate fans speeds. It cannot be use with lighting. However, lights on fans equipped with three wires – typically red, black and white – can be separately controlled using an additional Enbrighten Z-Wave switch or dimmer.
Range extender – The fan control repeats your Z-Wave signal from your hub or other Z-Wave device to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
Changeable paddles – White and light almond paddles are included to match your existing switches. Additional colors of the easily changeable paddles are also available.
Universal compatibility – Z-Wave Plus and all previous Z-Wave generations work together to allow continued expansion of your home-automation network.
Eve Outdoor Cam 2-Pack Secure floodlight Camera, High Security & Privacy (HomeKit Secure Video), 1080p, Night Vision, Wi-Fi (2.4 GHz), Motion Sensor, 2-Way Communication, People/pet/Vehicle Detection
Original price was: $494.95.$36.99Current price is: $36.99.
Enbrighten Z-Wave Plus Fan Control, Works with Alexa, Google Assistant, 3-Way Compatible, ZWave Hub Required, Repeater/Range Extender, Smart Ceiling Fan Control, Smart Switch, White & Almond, 14314
$40.63
0
People watching this product now!
Reviews
8 reviews for Enbrighten Z-Wave Plus Fan Control, Works with Alexa, Google Assistant, 3-Way Compatible, ZWave Hub Required, Repeater/Range Extender, Smart Ceiling Fan Control, Smart Switch, White & Almond, 14314
Shop Woodmart
SpaceSkier –
Easy to install, 4 speeds, integrates will with Smartthings and Alexa
Why did you pick this product vs others?:Easy to install and works very well to control a ceiling fan with 4 different speeds. With the Z-Wave functionality it integrated quickly into Samsung Smartthings home automation controller and through Smartthings to Amazon Alexa for voice control.
RSA –
Automation without a remote
Works great. I was able to turn a regular fan to a automated fan using alexa. No remote control needed. I have so many remotes it’s nice not to add on. I use hubitat zwave controller to control the fan control
Mike K –
Great ZWave control for ceiling fans
Installed like any other switch. Connected to 2 basic ceiling fans in my garage. Adopted on my Hubitat Z-wave network right away. The only thing keeping it from full 5 stars is the only speed feedback is how rapid the LED flashes 3-5 times after adjusting speed. Control is only via up and down rocker, so changing speed and on/off isnt very intuitive, until you get used to it. Wish it was available in gray to match my other switches and receptacles.
Ron S. –
Just works
I have several of these and have been using them for years. Over the past 10+ years, two have just stopped working and this was a replacement for one of them that’s been connected to a ceiling fan.Installation was as expected, and no issues including it in the Z-Wave network, currently being run off of Home Assistant.
LeMachine2U –
Waste of Time Not Smart Fan Control
Does not work… failed after 35 days. Now unable to turn off the fan or adjust speed… Only way to turn off the fan now is to pull out the air gap switch or use the fan remote. In box installation instructions and video are horrible… especially when trying to connect Z-wave to app or Hubitat Hub… forget about using this product. Garbage waste of $45. I should have returned this after struggling for hours to get it to work with Hubitat. I have installed dozens of other smart devices and this was the worst product of them all.
MACHINE –
Great IoT products
Jasco products are great, and their IoT devices are the best bar none. They were early developers for the IoT industry — and no I don’t work for Jasco.The only negative reviews I saw were related to speed and fan control, which likely has nothing to do with switch but is more likely related to fan itself or flaky IoT hub.I have 3 of the devices (plan to buy 3 more) and I can say with 100% certainty that all 3 fans have the same force, rotation function present that they had via the manual switch, same velocity and with no problem with connections/control via my Smart Things hub.So I attribute those “negative” reviews to home or fan environmental issues. These are and have been for me great products.
B –
Where’s the pigtail?
Switch works as expected. Should have bought the 700 series with security. Wasn’t available when I bought this. Does not come with spare neutral pigtail, so be sure you have some spare wire laying around before you start.
Mike Next –
Works great with Home Assistant, buying a second one
Works great with Home Assistant + Z-Wave JS UI.Quality seems great and on par with Zooz switches.Pairing was easy via Z-Wave JS UI inclusion mode. However, it did not support the QR-code provisioning entries “Smart Start” method that I prefer.I can toggle on/off easily in HA, but for speed control it only supports 0-100% slider so you need to know the thresholds to know which speed setting (1 to 3) you are in. There might be a workaround, but out of the box it shows the slider. Pictured with a Zooz ZEN72 Dimmer (right) and the Jasco on the left.Details:zwave-js-ui: 9.27.8.6c82b1dzwave-js: 14.3.7Home Assistant Core 2024.12.2 (via docker)Zooz ZST39 800 LR USB Controller with FW v1.50