TrueZONE HZ311 Panel for conventional, single stage applications up to 3 zones (1H/1C). Heat Pump Compatible: No; Compatible with Sensor: Discharge Air Temperature Sensor. Product Dimension: Height 8 in X Length 8 in X Width 1.86 in
Is Discontinued By Manufacturer : No
Product Dimensions : 9 x 9 x 3 inches; 1 Pounds
Item model number : HZ311
Date First Available : September 24, 2008
Manufacturer : Honeywell
ASIN : B001GLYC8S
Best Sellers Rank: #97,834 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #92 in Home Thermostat Accessories
Customer Reviews: 4.6 4.6 out of 5 stars 582 ratings var dpAcrHasRegisteredArcLinkClickAction; P.when(‘A’, ‘ready’).execute(function(A) { if (dpAcrHasRegisteredArcLinkClickAction !== true) { dpAcrHasRegisteredArcLinkClickAction = true; A.declarative( ‘acrLink-click-metrics’, ‘click’, { “allowLinkDefault”: true }, function (event) { if (window.ue) { ue.count(“acrLinkClickCount”, (ue.count(“acrLinkClickCount”) || 0) + 1); } } ); } }); P.when(‘A’, ‘cf’).execute(function(A) { A.declarative(‘acrStarsLink-click-metrics’, ‘click’, { “allowLinkDefault” : true }, function(event){ if(window.ue) { ue.count(“acrStarsLinkWithPopoverClickCount”, (ue.count(“acrStarsLinkWithPopoverClickCount”) || 0) + 1); } }); });
Robust Push Terminals
Common-Sense LEDs
Clean, Professional Installation
Smaller Footprint
Variable-Speed Fan Control
LAFVIN Project Super Starter Kit for R3 Mega2560 Mega328 Nano with Tutorial Compatible with Arduino IDE
Original price was: $30.99.$3.99Current price is: $3.99.
GHome Smart Switch, Smart Wi-Fi Light Switch for Lights Work with Alexa and Google Home 2.4Ghz, Single-Pole, Neutral Wire Required, UL Certified, Voice Control (4 Pack)
Original price was: $39.99.$7.99Current price is: $7.99.
-84%
Honeywell HZ311 TrueZONE Panel
Original price was: $147.37.$23.99Current price is: $23.99.
0
People watching this product now!
Reviews
8 reviews for Honeywell HZ311 TrueZONE Panel
Shop Woodmart
Rajesh –
Easy to install
Worked as expected without any issues. Was Easy to DIY.
Rick –
Great swap/update for Total Zone 4
This review is for the HZ311 since Amazon seems to group different models together in reviews.I bought this panel as a replacement for a Total Zone 4 that was going bad. The HZ311 is a significant upgrade to the older total zone boards. Since I only have 2 zones with 2 dampers each and a single stage gas furnace, this panel was the right one for me. It can actually handle 3 zones if needed. The design is much smaller and more modern than the older one with all circuitry hidden. The swap out was extremely easy as there are no dip switches or jumpers that have to be set for install. All you need to do is hook up the correct wires to the correct terminals and you are done. The terminals are simple push in type requiring no screwdriver and each terminal has two little holes in it that allow two wires to be hooked up to one terminal if needed. I needed this since I run 2 dampers per zone in parallel. Just make sure you verify that the wires are fully inserted into the terminals. There’s a little resistance that makes it seem like it may be fully inserted, but then one more little push and you can tell it’s now in and locked. I’ve had this installed for about a week now and so far, so good. I would highly recommend this panel if you need to upgrade yours or to change out an older, failing one like I had.
Aum –
Easy install took about 1/2 hour to install and test.
If you already have one installed, this is a 1:1 install. just push in the pins to release the current wires, move the current wire to the same location on the new board and you can save yourself a lot of money.My HVAC company wanted to charge me over 800usd to install a new unit. They did not mention that the unit already in place, which they installed was still under warranty (5 year). When I mentioned the warranty they got quiet. In any case a re-install is easy, tape your receipt to the unit for a return.Sadly the manufacturer only talks with HVAC people when it comes to support. So..
Raul Medrano –
Right product as described.
As I spected price and work good.
Ken –
Have or want a Nest, but have a zone system? This will work for you.
I bought this because we purchased a house that had a Honeywell MM2 Trol-A-Temp master/slave thermostat controller. We already owned two Nest thermostats that ridiculously does not work with this common setup. (Come on Nest, your thermostats should be able to talk with each other and co-ordinate.) You can bodge one Nest as the master thermostat with a Trol-A-Temp by pushing the heat change-over wire in to the W1 receptacle with the W wire so that the Nest will tell the MM2 to use heat and call for it at the same time (and do the same with the cool change-over wire and Y/Yellow). But then you have to leave the dumb slave thermostat in place and it can only call for heat or cool when the Nest is doing the same.The HZ311 was easy to install and includes a C connector for each thermostat to allow your smart thermostats like Nest to charge without having to call for heat or cool. It does this with a dedicated, required 24V tranformer (not included). This assumes you have enough wires running to your thermostat of course. (I have a Fast-Stat 3-wire to 5-wire on order since I cannot pull new cable to replace the 3 wire cable for zone 2.) Be aware that Nest’s trick for sipping power by fast cycling the heat when it needs to charge does not play well with the HZ311. You must find a wire you can use for a C wire. Until my 3-to-5 wire system arrives, I have re-purposed the fan (G/green) wire since the thermostat usually does not need to control that on a modern (last couple of decades or so) system (and I assume the HZ311 would take care of that necessity any way). So I only have the ability to heat from my 2nd zone at the moment.tl;drWorks great with modern connected thermostats. Provides separate power for charging/running smart thermostats without robbing the HVAC or playing games. You must find a wire to use as a C/common wire.
Matteo H. –
Not completely sold and Here is Why
I purchased this unit for same reason other reviewers did: to replace an old board.The old Beutler board controlled two wall display units “fancy word for thermostat” one downstairs one upstairs, and a three-terminal (open close neutral) fresh air return damper for a duct located on the side of the branch box for the return main trunk line which used to mix fresh air with return air. I installed this unit successfully with two Honeywell Home thermostats (replacing the wall display units) and all went well until I needed to connect my fresh air damper and this is where I ran into a big issue:To control the fresh air damper you would have to also purchase separately a Honeywell fresh air controller W8150A1001 to connect to the 311 and act as the fresh air controller, but the issue is the W8150A1001 only controls two-wire dampers and does not support a three-wire damper connection.I will have to call Honeywell to inquire whether it will be ok to rig the connection in a separate manner as basic instruction packet it’s a joke, it offers absolutely squat in terms of providing alternative ways of wiring configurations such as jumpers etc.Incredible to think the Beutler board from the times of the round table would be more straight forward and offer more options.
Vance Paulett –
Fairly Easy DIY Project. Works Great
Our old Honeywell panel stopped working and the AC repairman wanted over $1600 to replace it. I found this exact model on Amazon and did it myself for $125 + tax. If you’re swapping out an exact match like I did, it’s an easy DIY project. Just take your time and transfer the wires from the existing panel to the new one.
Mr Turbo –
Great controller.