Product description
Please go to the store to choose, compcctv, Professional, Security Camera Mount Bracket
Universal Camera Bracket, Heavy dutyweatherproof aluminum bracket fits mostbrands of outdoor camera housing, Aluminum stand not plastic
APPLICATION: Ideal for indoor outdoor domecameras, Security Camera Mount Bracket, high quality with professional design,more stable and reliable.
Dimension long: 8.6 inch CCTV camera mountingbracket -Color:white
Hidden hole: Cable can feed thru L bracket tothe housing thus provide cable protection Outdoor and Indoor Use.
NOTE: please read compcctv, product size map anddescriptions carefully before purchasing.
Amazon Customer –
Very good
That’s what I was looking for
Carlos munguia –
El producto
Muy bueno, pero muy complicada la instalacion
tjs –
Works good but requires some modifications
The camera mount works but I recommend a few changes.First thing I didn’t like was that the wall mounting plate was not attached to the gooseneck straight as seen in my first picture. The drawings in the product listing indicate that it should be straight. It took additional time to mount the unit correctly.In one of the reviews they mentioned that the screws rusted so I replaced all of the screws with stainless steel screws. The two screws that attach the gooseneck to the camera mounting box as seen in my second picture I used two stainless steel M5-8 screws. The three screws that are used around the camera mounting box I replaced with three stainless steel M4-12 screws.Also be sure to use some white caulk to seal up any openings.I ran the wire through the base plate so I applied duct tape on the cable opening on the gooseneck near the wall mounting plate and filled the hole with caulking. Where the gooseneck attaches to the camera mounting box (see my second picture) there is a gap where water can get in. after I adjusted the camera box and tightened the two screws, I caulked the gap between the gooseneck and the lower camera mounting box.One last issue I noticed after mounting my dome camera and attaching the bracket to the wall was that rain was rolling down the dome on the camera and tripping the motion sensor. A future modification will be adding an overhang rain shield to stop any rain from rolling down the camera dome.I’ll also need to see what happens with snow before I install a shield.The camera I used was a JideTech P1 PLUS -5X-8MP PTZ.I had to drill two holes in the mounting plate to properly attach and align the camera.
james –
Ok
Work for me
Rosa Herrera –
Terrible Quality
This wall mount bracket is made of low-grade metal and feels really flimsy. The finish is rough, edges are poorly cut, and it doesn’t hold the camera securely. Definitely not the sturdy outdoor mount it claims to be. Huge disappointment.
Hossfly –
Would buy again if needed!
Very good…especially for the price. This is used in conjunction with a Reolink camera. As another reviewer stated, you will most likely need to drill a hole in the center of the mounting plate to allow your camera wire to pass through as the factory hole is located on the edge. Just make sure to add the included grommet or electrical tape to the hole for wire protection.
Ismael Diaz –
Pole cam
Really stand out towards the camera great 👍🏽 👌🏽 👏🏽 product will purchased again
David Filmer –
Well made but won’t work with Amcrest dome cameras without modification
Most similar mounts won’t work for Amcrest dome cameras because most mounts have the wire clearance hole in the center. This has an offset hole suitable for Amcrest, but the hole pattern does not match. I was able to use one of the slots but needed to drill two more clearance holes. It would be nice if the mount had these clearance holes already punched to make it also work for this popular brand of camera.Otherwise the mount is very well constructed and very suitable.
Antonio González Sanchez –
Buena opción para la camaras de domo y buen espacio para ocultar los cables, lo único es que la pintura viene muy ligera y con cualquier golpe pequeño se vota o raspa
Cameron Davidson –
Excellent!
P.C. –
Sturdy and holds the bullet camera well. The opened holes may let his bugs build nests…to be determined
Daryl Davis –
Absolute garbage. Stem wouldn’t fit into top of unit that holds camera. Too much paint. Took forever to assemble.Buy elsewhere.
danny –
Worked well but bit cheap quality