TP-Link AC1900 WiFi Range Extender RE550 | Dual-Band Wireless Repeater Amplifier w/Gigabit Ethernet Port | Up to 2200 Sq. Ft., 32 Devices | Internet Signal Booster | APP Setup | EasyMesh Compatible

Solid wifi extender
I am well versed with Wifi technologies. This is a great little extender that I used in an home ASUS mesh environment. While this does not connect to AImesh it does connect easily to the environment and is compatible. I use this for a covered patio outside during the warm months of the year. I access the GUI through a web browser interface….not an app so I can’t speak to that (just old). It is a dual band extender. I usually use 5ghz for the backhaul and 2.4 for the extension channel. At max performance this device easily reaches my shed with strong signal about 100 ft away. I choose a more limited performance due to wifi interference at the 2.4 level. This works extremely well on covering the patio areas and not bleeding over into the house.This device replaces much more expensive devices (Nighthawk extenders) and works far better. At the $40 deal price that I purchased this on it can be offered up outside under the patio and is affordable to replace unlike the Nighthawks.I’ve had problems with the GUI in the past with TP Link but this web interface was straightforward and easy to follow. Its easy to plug it in and then unplug it when necessary. The boot time is long but that is the case with most network devices.The connections are solid to multiple devices and the throughput and download speeds are acceptable for 4k streaming from the internet and internal network.A worthy purchase at the price point for my use.

Strong Coverage Boost With a Few Setup Hiccups | Fox Den Reviews
After dealing with stubborn Wi-Fi dead zones in the upstairs bedrooms and on the patio, I picked up the TP-Link RE550 — and I’m happy to report it delivered a noticeable upgrade. Streaming is smoother, smart home devices stop dropping offline, and pages load without that frustrating “spinning wheel” delay. Once connected, performance has been stable and speeds remain impressively close to my main network.I especially like the signal strength indicator LEDs on the unit — super handy for finding the ideal placement. The Gigabit Ethernet port is also a great bonus for devices that benefit from a hard-wired connection like a TV or gaming console. And being EasyMesh compatible gives me room to expand in the future, which is a nice plus.Where it fell just short of 5 stars:   •   The setup wasn’t as smooth as advertised — the app froze once and I had to reset and retry pairing   •   It’s a bit bulky, so depending on your outlet placement, it may be a tight fitOnce everything was sorted, though, it’s been rock-solid. Great range, strong speeds, and no more Wi-Fi “dead zone frustration.”A solid upgrade for anyone wanting to extend reliable coverage without jumping fully into a mesh system just yet.🦊📡 Fox Den Reviews Approved — Reliable Performance With Minor Quirks

Es un equipo que compre para sustituir a otro modelo de TP link el RE650. Este equipo tiene la opcion de onemesh, que te permite unificar tu red con diversos extensores y que tus equipos se conecten al mas potente para ellos.Es muy facil instalarlo, en cuestion de 10 minutos ya esta listo y funcionando.Desgraciadamente el onemesh no funciona tan bien y los equipos se conectan indiscriminadamente a cualquiera de los extensores y al router principal. Con esto a veces la conexion se realiza al extensor mas lejano, bajando el rendimiento.Ademas de lo anterior, la potencia de estos equipos es mas baja que el RE650, estando pegado a ellos, no logran sobrepasar 200Mbps de conexion, cuando el RE650 alcanza los 500Mbps en mismas condiciones.Si la veloidad de tu red de internet es menor a 200Mbps, tal vez te funcione sin mermas en velocidad, pero si es superior a eso, jamas lo alcanzaras con este equipo.Ademas es mas caro que el RE650.

Habe eine Fritzbox 7490, die Installation war recht einfach, der TP-Link WiFi 6 Extender harmonierte aber nicht wirklich mit meiner FritzBox. Die erhöhte Reichweite, na ja sagen wir mal unwesentlich. Vergleichbar mit einem WiFi 6 Repeater von AVM, aber es kam nach einigen Tagen immer häufiger zu WLAN Aussetzern. Also Repeater und Extender neu installiert, keine Besserung. Habe dann einen AVM WiFi 6 Repeater installiert, alles läuft gut. Ich denke der TP-Link WiFi 6 Extender ist grundsätzlich ein guter Extender, aber nicht in meiner WLAN-Umgebung. Gerät zurückgesendet.

I have been using another Extender for a couple of years now, it works, but I the connection is not always stable or available for devices I need to connect outside, but it works 85% of the time. And I always have doubts or cannot always trust the extender always feed coverage / signal connections. I have tried 2 other products of extenders but they worked pretty much the same. That is why I thought…well, it’s probably my problem how everything is constructed and lay out in regards to the areas I need to use this extender. So I have given up in trying to find something better because I think it’s going to be pretty much the same results.So last week I finally decided to give another chance to look for a better Extender, I found this, but at first I didn’t have much high hope, I would just try it and then refund it if the performance is not what I expected. But to my surprise, the signal is so much stronger providing VERY stable and solid connections ! Now I feel 100% with this extender providing solid connection, I can see my devices loading faster, and not drops at all, everything just work so much better now. Very happy. Now in my case, I’m not so much concerned about “dead zones” is more like I need a solid connection to where I need to use it and this extender performed just that, a solid connection. My internet connect is pretty solid so if the extender can extend it, then everything will be fine, again, this extender did a solid job in extending connection. I’m sure this extender can always broadcast a very long range of connection to help reduce dead zones/spots.Oh, in terms of installation/setup, I do recommend to use the “Tether” app to setup. It’s easier for most users. But if you have experience with extenders, you can always connect to the extender network and use a browser (i.e. your phone, iPad, or even a computer) to configure and setup the extender. For me, I used the Tether app to setup the Extender, and I used the Tether app to check status of the extender but the browser offers you more options in settings (i.e. changing wifi passwords – you cannot do that with the Tether app). The instructions are all there in the piece of paper and it’s not long so don’t need to be scared, it’s pretty easy. Just follow what it says. And basically you can just setup/configure using the Tether app but the app is 80 Mb so I might delete it and just connect to the extender and configure / monitor from a browser going forward (just need to save the URL on my browser)If you want to use the Tether to setup/configure this extender you will need (do it before you setup the extender):1. Create a d-link account (very easy, just need an email and create a password)2. Have a Password Handy for your Extender – make 1 up (You need to create a login password to your Extender – You don’t want everyone to be able to connect to your Extender and mess things up right?) – you will still need this even if you don’t use a Tether app to setup your extender.3. Have your WIFI password ready (the password of the WIFI connection that you want the extender to use). If you are connecting your extender to your router/modem directly with a cable, you do not need this but I think most people are trying to extender their WIFI connections wirelessly.Worth every penny imo, I got this on sale for $60 CDN + tax. . 5 Stars product. Good Luck and hope this extender will be the last one you need for years to come.