From the brand
As a leading provider of smart home solutions, Aqara excels in delivering a wide array of award-winning, user-friendly smart home products and platform solutions tailored for your home. We proudly serve over 12 million customers in more than 170 countries and territories. Our products are designed to offer convenience, security, and energy efficiency, making your home smarter, more sustainable, and adaptive to your evolving needs.
Aqara Smart Lock
Aqara Cameras & Hubs
Aqara Sensors
[Notes] An Aqara Hub is required and sold separately. Not compatible with hubs from other brands. Requires a secure 2.4GHz Wi-Fi connection for Hub M2, M1S, E1, M1S Gen2, G2H Pro, and G2H; or 2.4/5GHz Wi-Fi for Camera Hub G3. (Hub M2 also supports wired Ethernet via RJ45.). Pair the Zigbee Water Leak Sensor with an Aqara Hub before connecting to Apple HomeKit, Google Home, or Alexa. For a stable Zigbee connection, ensure the sensor is placed within 10 meters(33 ft) of the Aqara Hub.
[Proximity] To ensure a stable connection, keep the Aqara Water Leak Sensor within 400 inches (approximately 10 meters) of the Aqara Zigbee Hub, and place the hub within the same range of your Wi-Fi router. Ensure both are connected to the same local area network (LAN). Zigbee2MQTT and comparable third-party USB dongles are not officially supported by Aqara. Full product functionality may be limited or unavailable.
[Drip and Leak Detection] Equipped with highly sensitive probes that detect water levels as low as 0.5 mm (approximately 0.02 inch), this water leak detector instantly sends alerts to your phone and triggers the local alarm on the Aqara Hub whenever a leak is detected.
[Home automation] The water leak detectors for home can control and trigger other Aqara devices when water is detected, allowing you to take prompt action to keep your home safe. ***Requires Aqara Hub, not third-party hub.
[Wireless & Compact Design] No wiring or screws are required. The small, sleek design allows you to place the Zigbee leak sensor on any flat surface in your kitchen, basement, laundry room, or any area you want to monitor. Recommended placements include near or under toilets, water heaters, washing machines, dishwashers, sinks, fish tanks, sump pumps, or any area prone to leaks.
[Industry-Leading Quality] Durable IP67 water-proof housing with rust-proof exterior coating. Please remove the battery tab before use. If the device does not work, check the battery level. For any questions, please feel free to contact us.
ecesriram –
Excellent water leak sensors — easy to set up and reliable!
I’m really impressed with this Aqara Water Leak Sensor 3 Pack. Setup was quick and seamless using the Aqara Hub, and the Zigbee connection has been rock-solid ever since.The sensors are compact and easy to place—perfect for under sinks, near appliances, or in the basement. I tested them with a small amount of water, and they instantly triggered an alert through the app. Notifications come in fast, which gives great peace of mind.I also love that it works with IFTTT, so you can integrate it into your broader smart home setup. This is a great investment for anyone looking to prevent water damage and stay ahead of potential leaks. Highly recommend!
SneakerDadBod –
Splish, Splash, and No Crash
Water mishaps in a home can be like uninvited guests at a party – they show up unexpectedly and can be a real downer. That’s where these nifty water sensors come into play. I picked up a pair, one for my heat pump water heater and the other for my washing machine. I must say, they’re like the silent, watchful guardians of my appliances.Imagine this: you’re sitting down for your favorite TV show, and suddenly your phone pings with a notification that could rival any cliffhanger – water detected! That’s what happened to me. Within seconds, I was able to avert a mini flood from my washing machine. The sensor’s responsiveness and the immediate alert to my phone were impressively efficient. It was like having a personal home guard without the need for treats or belly rubs.The setup? A breeze. Even for someone who often gets baffled by tech gadgets, I found the installation process to be straightforward. The design is compact and unobtrusive, blending in seamlessly with my home decor – a small but mighty presence.The second sensor, stationed like a silent guardian angle next to my water heater, hasn’t had its moment of glory yet, but I sleep better knowing it’s there. It’s like insurance; you hope you never need it, but you’re grateful for its existence.Sure, water sensors might not be the most thrilling topic at your next dinner party, but they’re definitely a conversation starter. “Did I ever tell you about the time I nearly had an indoor pool?” is a great icebreaker.Overall, these sensors have brought a sense of security and peace of mind to my home. They’re the unsung heroes in the world of home appliances, quietly guarding against potential disasters. No capes needed, just a reliable alert system and a little bit of tech magic.
Technic Mender –
The Aqara Water Leak Sensor is a compact and responsive device that shows great promise.
The Aqara Water Leak Sensor is a compact and responsive device that shows great promise. Its small size and quick setup make it easy to place strategically around your home. The sensor’s impressive speed in detecting water leaks is a standout feature, offering peace of mind against potential water damage. However, there are some critical limitations to consider. First and foremost, the sensor requires an Aqara hub, which excludes it from compatibility with other Zigbee hubs, even though Aqara produces some of the best in the market. This limitation is a significant drawback for power users who prefer more flexibility in their smart home ecosystem. Additionally, while the sensor indicates a leak in the Aqara app, setting up a notification for a leak requires additional steps. The app doesn’t clearly guide users through this process, which could lead to missed alerts if not configured correctly.The sensor is advertised to have a 2-year battery life, though I haven’t owned it long enough to confirm this. Replacing the battery is straightforward as it uses a common coin cell battery. Despite these shortcomings, the Water Leak Sensor’s core functionality is impressive. Its rapid detection time and reliable performance make it a valuable tool for protecting your home from water damage. However, potential buyers should be aware of the limitations and be prepared to invest in an Aqara hub and spend time setting up notifications.
murraybiscuit –
Works with Sonoff Zigbee dongle
These sensors don’t require an Aquara zigbee hub. I have 6 sensors paired to Home Assistant via Sonoff USB dongle, working fine. These trigger HA automation to notify in the event of moisture, disconnect and battery low status. Bonus marks for the temperature sensor included for free.
Evan M. –
Works great, nearly instant alarm when wet, Aqara quality
I am using 3 of these with an Aqara M3 Hub. The M3 (which I would highly recommend) has a built in speaker for alarms.Adding the leak sensor to the Hub was easy and took only seconds. The Aqara phone app offered to automatically create an alarm for them.I tested them by wetting my hand and pressing them into my hand, they each immediately notified of a leak via the M3 Hub’s audio alarm. They have two exposed metal screws on the back whihc sense water using an electrical signal between the screws. I beieve they would signal a leak if you had aproximately 1 mm of water, so not much. They do need to be placed flat on the surface you want to monitor. I put them in some corners of my basement where water has got in previously.I used these under Home Assitant as well (they work great with Zigbee2MQTT), but decided I liked the Aqara ecosystem features better. Either method of control works well, depending on your preference.Note that you compress the dome of the sensor to push the pairing “button”. And a blue LED will blink through the dome. It’s not totally obvious to do this.
Andrés –
In the realm of home automation and smart living, the Aqara Water Leak Sensor stands as a beacon of reliability and peace of mind. Paired seamlessly with my home assistant via Zigbee2MQTT, this little device has become an indispensable guardian against potential water disasters.Installation was a breeze, thanks to its compact design and straightforward setup instructions. Within minutes, it was operational and ready to safeguard against leaks under the sink or even around my hot tub area. The sensor’s sensitivity is impressive, promptly detecting even the slightest hint of moisture and sending an instant alert to my smartphone.The integration with Zigbee2MQTT ensures that I can monitor the sensor’s status and receive notifications directly through my preferred home automation platform. This level of connectivity allows for seamless integration into my existing smart home ecosystem, enhancing its functionality without complexity.What truly sets the Aqara Water Leak Sensor apart is its reliability. During testing, it responded swiftly to simulated leaks, triggering alerts without fail. This responsiveness gives me confidence that my home is protected around the clock, whether I’m nearby or miles away.In conclusion, if you’re looking to fortify your home against water-related mishaps with a dependable and easy-to-use solution, look no further than the Aqara Water Leak Sensor. It’s a must-have for any smart home enthusiast seeking both functionality and peace of mind.
Andrea Cipriani –
Ho recentemente acquistato il Aqara Sensore di Perdite d’Acqua 3-Pack per il mio sistema di domotica, e sono davvero soddisfatto delle prestazioni. Questi sensori si sono rivelati un’aggiunta fondamentale per la sicurezza della mia casa, specialmente per evitare danni da acqua in luoghi come cucina, bagno e seminterrato.Facilità di installazione e integrazione 🔧L’installazione è stata davvero semplice. Basta collegare i sensori al hub Aqara, che è già parte del mio sistema di automazione domestica. Una volta connessi, i sensori sono stati riconosciuti immediatamente dall’app Aqara, rendendo il tutto molto intuitivo. L’applicazione è facile da usare e consente di monitorare in tempo reale lo stato di ogni sensore.Prestazioni affidabili e sensibili 💧I sensori di perdite d’acqua sono estremamente sensibili. Li ho posizionati in punti critici come sotto il lavandino della cucina, vicino al frigorifero e nel seminterrato, e sono riusciti a rilevare anche piccole perdite di acqua. Quando rilevano umidità o allagamenti, inviano immediatamente una notifica sul mio smartphone, il che mi dà la tranquillità di intervenire prontamente, evitando danni potenzialmente costosi.Design compatto e discreto 🏠Il design dei sensori è compatto e discreto, quindi possono essere facilmente posizionati senza attirare troppa attenzione. Non occupano molto spazio e sono abbastanza leggeri da essere posizionati ovunque, pur mantenendo un’ottima sensibilità nel rilevare perdite.Compatibilità con la domotica 📱Un altro punto che ho apprezzato è la compatibilità con il mio sistema di domotica esistente. I sensori Aqara possono essere integrati facilmente con altre soluzioni smart, come Alexa e Google Assistant, e possono essere configurati per attivare altri dispositivi quando viene rilevata una perdita d’acqua. Ho impostato il sistema in modo che, quando il sensore rileva un problema, mi invii una notifica e attivi una luce lampeggiante come segnale di allarme.Durata della batteria e manutenzione 🔋La durata della batteria è molto buona. Non ho dovuto cambiarle finora, e i sensori continuano a funzionare senza interruzioni. Sono anche facili da mantenere, senza necessità di interventi complessi.Conclusioni 💡Sono estremamente soddisfatto dell’acquisto del Aqara Sensore di Perdite d’Acqua. È un sistema efficace e semplice da usare che mi dà una maggiore sicurezza contro potenziali danni da acqua. Se stai cercando un sistema di allarme per perdite d’acqua che si integri facilmente con un sistema di domotica intelligente, questi sensori sono sicuramente una scelta eccellente! 👌
Sean –
Aqara sensors work great for Home Assistant and don’t require the Aqara Hub (even though it says it does). The metal parts that detect the water leak are actually screws, so you can use them to attach some wire instead, if you have to detect a leak in a place where you can’t (or don’t want to) place this sensor. This is helpful if it is a very small space, or somewhere the sensor could be damaged, or somewhere where the Zigbee signal could be blocked, such as inside a metal enclosure.
Amazon Customer –
Excellent! It does what is supposed to be doing, and it also gives me a graph of temperature over time during the day.
Yves DOUTRES –
J’ai eu quelques difficultés pour appairer le capteur au hub M2. Le bouton goutte d’eau n’est pas sensible, il faut tâtonner longtemps. Par contre ensuite fonctionne parfaitement. Très réactif, le signal zigbee est instantané, le hub M2 déclenche une alarme sonore, envoie une notification sur le smartphone et chez moi déclenche un module switch T1 avec neutre actionnant une électrovanne coupant l’arrivée d’eau juste après compteur. Le zigbee rend le système indépendant d’Internet, en cas de coupure ADSL l’électrovanne est encore actionnée. Donc plus de sécurité!. Le hub est indispensable et permet d’ajouter des capteurs, j’ai 3 capteurs inondations connectés sans problème. L’application Aqara home permet de gérer le tout et elle n’est pas buggée!!