USX MOUNT Universal Soundbar Mount, Sound Bar TV Bracket for Soundbar with Speaker, Fits 2 Installation Options, Removable No-Slip Base Holder Extends 3.46”-6.06”

Sturdy, adjustable and cheap! YAY
Great, easy to setup, looks nice

NEEDED MODIFICATION
I had a really hard time choosing between 3 stars and 4. Landed on 4 because all the other soundbar mounts have slots or mounting holes all the way down to the soundbar, which is entirely unnecessary and ugly. My soundbar (Sony Sonos Arc) requires it to be 4 inches below the TV in order for audio quality to be the best from the upfiring speakers. This mount was the only one I could find that would do that AND not show any mounting holes between the soundbar and the TV.HOWEVER, with my specific TV mount, and soundbar, I needed to cut the top of the soundbar mount off as it interfered with my TV mount. I also had to open up the bolt holes to match up with the rear mounting holes on my soundbar. You absolutely could get away without doing that, but I wanted my soundbar rigidly mounted, rather than just sitting on the mount.I really probably should be giving it 3 stars based on that, but with all the different TV mounts, and soundbars, it’s almost inevitable that you’re going to come across some situations that require some modification. On top of that like I stated earlier, this is the *only* soundbar mount I could find that was reasonably priced and did what I needed it to do. If you’ve made it this far, it functions great, and it’s plenty sturdy. It went together relatively easily other than the modifications I had to make.

Samsung 77″ OLED S90C W/Q-series 9.1.2 ch. Wireless Dolby ATMOS Soundbar Q910C
Wall Mount,This particular soundbar mount from USX Mount (XAS002) paired with the USX Mount (XML008-1K-01) is a perfect pairing for a tight, square, plum, and ridgid mount for the two components listed in the title. And likely many other Samsung soundbars, such as the 60C, 990C and so on. I just picked the 910C as its the only Samsung Soundbar that’s “packaged” with a Bluetooth surround speaker option that utilizes wired (audio wiring) surround sound speakers. We needed this particular style amp, as long ago I mounted our speakers in the ceiling behind each end of the couch and ran the wires though the attic and down through the wall. We are not a fans of free standing speakers.Plus, you need to run power to each speaker anyway, so you might as well go all in.You will see this amp mounted to the wall using two small bent shelf brackets using drywall inserts.For Soundbar to be tight to the underside of the TV,Two things, When facing the TV and imagining the TV and soundbar already installed you will end up cutting one segment (small hole end of the bracket) off of both sound bar mounts that run vertical behind the TV. This will allow the vertical soundbar mounts to go up far enough that the soundbar nearly touches the bottom of the TV.You can still access the TV switches. If you dont care if the bar is lower, then just leave them as is. It just seems to look better.When attaching the Samsung wall mounts to the soundbar, use two of the 8MM screws supplied with the vesa mount along with two standard washers and two fender washers and push the Samsung mount up as far as possible. The only thing you will utilize from the Samsung mounting brackets is the brackets themselves, you will not use the plastic grooved hanger washers.You will need two 8MM flange nuts, or standard nuts if you can find them, to use on the 8MM vesa screws.Make sure you use the appropriate supplied shim washers to avoid putting stress on the TV housing when tightening the TV, TV mount, and soundbar mounting rails together. These are included with the vesa mount. Also, make sure the soundbar mounting rails are between the TV and the TV vesa mount as shown in the pictures.Note,For those of you wondering what the extra box is in the picture, This is a MOCA system that converts RG-6 coax cable to ethernet. Probably the best way to distribute internet through existing lines when not using a standard router. We only use a MiFi 8800 puck from Verizon with one mesh unit and distribute the signal to multiple houses. No more Spectrum, Cox, ATT. No more raising the price after a month or so. Unlimited 4K steaming for two homes for a steady $65.00/month.This is by far the most sturdy assembly I’ve found so far. They pair well together for full motion of both the TV and soundbar together.I will be purchasing this setup again in the future.I hope the pictures help you in your installation,Good luck

Works great except…
I installed this on a Vizio tv with a Samsung soundbar which is my only problem with this mount. The Vizio has their screw holes close together and the Samsung has theirs far apart which meant it was about an inch short of me getting both screws into the mount and the soundbar. I used some heavy duty double sided tape and you can’t tell but I wish it would have screwed in. Other than that easy to install and seems to be a pretty good way to do it. I didn’t think it through so I installed the tv mount comepletely then took the soundbar mount out for installation and quickly realized I would now have to unscrew the mounting hardware from the back of the tv install the soundbar mount then reinstall the tv mount stuff back on top of that. Sounds more difficult that it is and that was my fault for not thinking it all the way through.